不同环境条件油气爆炸极限测试模拟实验系统

针对不同环境条件油气爆炸极限测试的特殊需要,研制了相应的测试实验台架和关键参数测试系统。对标准20L球形爆炸装置进行了改进,使之适用于不同环境条件油气爆炸极限的测定与分析,设计并构建了能够配制不同浓度油气的油气雾化循环配气系统、瞬态压力测试单元、温湿度测试单元和气体组分测试单元等。实验验证与分析结果表明：该模拟实验系统能够满足不同环境条件油气爆炸极限测试分析的需要,也可供其他相似可燃气体（液体蒸气）测试使用。     

陶瓷/薄钢板复合结构靶板抗高速侵彻性能研究

为探讨陶瓷/薄钢板复合结构靶板(ceramic/thin steel targets,CS靶板)的抗高速侵彻机理,通过弹道试验,分析了3 mm厚SiC陶瓷层和0.6 mm厚钢板层的CS靶板的破坏模式和抗侵彻性能,并与面密度基本相同的纯钢板进行了比较。在此基础上,基于能量守恒原理,建立了CS靶板抗高速侵彻的理论预测模型,并与试验结果进行了对比。结果表明,CS靶板中前陶瓷层的存在,使得后钢板层的破坏模式由剪切冲塞转变为花瓣开裂,大大提升了后钢板层的抗侵彻吸能效率,从而使得CS靶板的整体抗侵彻性能高于等面密度的纯钢板,CS靶板的整体抗侵彻效率较等面密度纯钢板提升15%以上;弹体穿透CS靶板后的剩余速度理论预测值与试验结果吻合较好,相对误差均在5%以内,验证了理论模型的合理性和有效性。     

Resistance of grid steel-tube-confined concrete targets against projectile impact: Experimental investigation and analytical engineering model

Steel-tube-confined concrete (STCC) targets are provided with excellent anti-penetration performance over semi-infinite concrete (SIC) targets since the steel tube imposes passive restraint on the in-filled concrete during the penetration process. Grid STCC system with square steel tubes is a potential solution to protective structures. In this paper, experiments of 9-cell grid STCC targets penetrated by 12.7 mm Armor Piercing Projectile (APP) were performed. The influence of side length and thickness of steel tube, steel ratio and impact velocity on anti-penetration performance were taken into account. Additionally, single-cell square STCC targets were also designed and tested for comparison with the 9-cell grid STCC targets. Damage modes and parameters of the tested targets were measured and discussed. Moreover, the stiffness of radial confinement of grid STCC targets is achieved according to the elastic solution of infinite cylindrical shell in Winkler medium. Furthermore, the penetration resistance and depth of penetration (DOP) for grid STCC targets are obtained on the basis of the dynamic finite spherical cavity-expansion (FSCE) models including radial confinement effect. It is shown that the 9-cell grid STCC targets with optimal dimension match of thickness and side length of steel tube can reduce the DOP by about 17 % and 23 % in comparison with the SIC targets and single-cell square STCC targets, respectively, due to both the confinement of square steel tube to concrete in the impacted cell and the additional confinement of the surrounding cells to the impacted cell; the penetration resistance and DOP of the grid and cellular STCC targets with similar steel ratio is close, and thus the grid STCC targets with simpler manufacturing process and excellent in-plane expandability are preferred in engineering practice; moreover, the predicted results of DOP model based on the FSCE models agree well with the tested results with the maximum disparity less than 12 % and the proposed model is more applicable to the grid and cellular STCC targets with high radial confinement.     

三元混合气体爆炸极限实验研究

瓦斯爆炸是煤矿灾害事故最主要的因素。瓦斯是以CH4为主,常含有CO2、CO、H2S、C2H4、C2H6、H2、SO2等的多元混合可燃性气体。随着各组分配比的不同,瓦斯的爆炸极限不同,呈现的火灾爆炸危险性也不同。利用HY12474型爆炸极限测定仪研究煤矿开采区常见的可燃气体混合物爆炸极限随组分配比变化的情况。通过对三组分不同配比混合气体的爆炸极限的测试,采用Taylor多项式,拟合出了常压下三元气体混合物的爆炸极限随组分配比变化的经验计算公式,并通过实验数据进行了验证,表明经验公式计算结果与实验数据很好吻合,具有工程应用价值。     

地下工程非爆破开挖机械破碎法机理及应用

针对非爆破法开挖工序中的关键问题——导向孔布置方案优化,结合非爆破施工实作流程及工艺,利用波动理论探索了破碎锤冲击破岩机理。破碎锤通过钎杆冲击导向孔产生孔间贯穿裂缝进而破岩掘进,破碎锤冲击破岩的过程是岩石被拉坏的过程,孔间岩石中的切向应力是提高破岩效率的关键因素。基于岩石断裂力学理论,总结得出导向孔间裂缝产生、扩展、贯通的判据,并依托实际工程进行验算,理论计算结果与现场试验结果吻合良好,同时提出了导向孔布置优化方案的改进建议。     

钢结构制药厂房火灾特点及爆炸坍塌情形分析

通过对钢结构制药厂房（车间）的建筑结构、火灾特点的分析以及钢结构建筑发生坍塌和引发爆炸等情形的正确判断,为今后处置该类场所灾害事故的救援行动提供参考依据。     

从吉化双苯厂爆炸事故处置解读化工火灾扑救对策

吉化双苯厂“11.13”爆炸火灾事故是一起典型的化工类火灾事故,造成了严重的财产损失和人员伤亡。这起火灾爆炸事故具有爆炸、燃烧速度快、立体式燃烧、过火面积大、危害性大等特点,总结了这起事故处置经验,给出了准确判断,科学决策;快攻近战;统一指挥,协同作战;多种措施相结合;冷却防爆,堵截蔓延;隐蔽抵近,适时出击等处置化工类火灾的对策。     

浅谈加强干部队伍机制建设

干部队伍建设是部队建设的根本。要抓好这项根本性的工作,就要建立行之有效的干部队伍机制建设,同时,要突出重点,落实措施,确保干部队伍机制建设落到实处。     

Electronic warfare in the optical band: Main features,examples and selected measurement data

The paper presents the possibilities of, and methods for, acquiring, analysing and processing optical signals in order to recognise, identify and counteract threats on the contemporary battleground. The main ways electronic warfare is waged in the optical band of the electromagnetic wave spectrum have been formulated, including the acquisition of optical emitter signatures, as well as ultraviolet (UV) and thermal (IR) signatures. The physical parameters and values describing the emission of laser radiation are discussed, including their importance in terms of creating optical signatures. Moreover, it has been shown that in the transformation of optical signals into signatures, only their spectral and temporal parameters can be applied. This was confirmed in experimental part of the paper, which includes our own measurements of spectral and temporal emission characteristics for three types of binocular laser rangefinders. It has been further shown that through simple registration and quick analysis involving comparison of emission time parameters in the case of UV signatures in “solar-blind” band, various events can be identified quickly and faultlessly. The same is true for IR signatures, where the amplitudes of the recorded signal for several wavelengths are compared. This was confirmed experimentally for UV signatures by registering and then analyzing signals from several events during military exercises at a training ground, namely Rocket Propelled Grenade (RPG) launches and explosions after hitting targets, trinitrotoluene (TNT) explosions, firing armour-piercing, fin-stabilised, discarding sabots (APFSDS) or high explosive (HE) projectiles. The final section describes a proposed model database of emitters, created as a result of analysing and transforming the recorded signals into optical signatures.     

垂直刚性面边界条件下水下爆炸气泡运动的理论研究

为研究垂直边界面对水下爆炸气泡脉动的影响,根据势流理论建立了垂直边界面条件下水下爆炸气泡运动的理论模型,编制计算程序进行求解。对水下爆炸气泡脉动运动的特点、流场的速度及压力的分布、气泡引起的载荷形式进行了分析,结果表明,此模型能够反映水下爆炸气泡和周围流体介质的运动规律,并能进行定量的计算。